▶ GENERAL DESCRIPTION
HCA526T-CAN2.0A is a high accuracy dual -axis inclinometer
developed by RION company, inherit the stability of the SCA series,
while the accuracy be effectively improved, and the temperature
drift performance with much more excellence , in addition the
system with built-in high-precision 16bit A / D differential
converter, meanwhile through 5 filtering algorithm, which can
measure the angle of sensor output relative to the horizontal tilt
and pitch tilt. The output interface CAN 2.0A are optional. sensor
that can correct the sensor temperature drift in accordance with
the changes of the built-in temperature sensor(temperature output
are optional), to ensure high repeatability of the product in the
low-temperature and high-temperature environment. The output
frequency response most up to 100Hz, for higher response frequency
Division we can customize according to the user requests. The
products are truly industrial-grade products, reliable performance,
scalability. Suitable for a variety of harsh industrial control
environment.
▶ FEATURES
★ Dual axis inclination measurement
★ Range ± 1 ～ ± 60 ° optional
★ Size: 90 × 50 × 34mm
★ DC 9 ～ 36V wide voltage input
★ Wide temperature operation -40 ～ + 85 ℃
★ Resolution 0.001 °
★ IP67 protection level
★ High vibration resistance> 2000g
★ Waterproof aviation plug
▶ APPLICATION
★Satellite positioning Search
★Rail-mobile monitoring
★engineering mechanical measurement of dip angle
★oil-well drilling equipment
★Radar detection of vehicle platform
★Underground drill posture navigation
★Based on the angle direction measurement
★Satellite communications vehicle posture detection
★Shield pipe jacking application
★Ship’s navigation posture measurement
▶ TECHNICAL DATA
HCA516&526T-C2 | CONDITION | PARAMETERS | UNIT |
| Measure range | | ±10 | ±30 | ±60 | ° |
| Measure axis | | XY | XY | XY | |
| Resolution | | 0.001 | 0.001 | 0.001 | ° |
| Measure accuracy | @25℃ | 0.005 | 0.01 | 0.02 | ° |
| Long term stability | | 0.01 | 0.02 | 0.05 | ° |
| Zero Temp.coefficient | -40～85℃ | ±0.002 | ±0.002 | ±0.002 | °/℃ |
| Sensitivity temp. coefficient | -40～85℃ | ≤50 | ≤50 | ≤50 | ppm/℃ |
| Power on time | | 0.5 | 0.5 | 0.5 | S |
| Response time | | 0.02 | 0.02 | 0.02 | s |
| Output rate | 5Hz,15Hz,35Hz,50Hz can be set |
| Output signal | CAN2.0A |
| EMC | According to EN61000 and GBT17626 |
| MTBF | ≥50000hours/times |
| Insulation Resistance | ≥100MΩ |
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) |
| Anti-vibration | 10grms,10～1000Hz |
| Protection grade | IP67 |
| Cables | Standard configuration: 1m length, wear-resistant, wide
temperature, shielded cable 4*0.4mm2 aviation connector |
| Weight | 190g(without cable ) |
*This parameter only list ± 10 °, ± 30 °, ± 60 ° series for
reference. For other measurement ranges, please refer to the
nearest neighbor parameter.
Product Overviews
FAQ
How long is the delivery time of the products?
A: Usually we have stock for every type of products, if the product
that you selected we have in stock, then we only need to re-test it
before leaving the factory, so the delivery time is around 2~4 days; if we don’t have them in stock, then we need to arrange the
production, the delivery time will be around 2 weeks. For the
customer-oriented design products, our engineers will give the
approximate delivery time according to the technical requirements.
Q: How about the payment conditions?
A: we accept 40% prepayment in advance, and the balance 60% payment before the delivery. For the customer-oriented design
product, the payment will be discussed together.
Q: How will we do if the product has the quality problem?
A: Our products have passed very strict tests before delivery, so
it is very low probability to have quality problem. If our products
have quality problem (not caused by man-made factors) in the
warranty period, our factory will arrange the free repair. If the
product can’t repair well, we will arrange to provide a new one. If
the product is out of warranty time, we will provide the repair
only charging the material cost.
