ACA616T Precision Quick Start Up Tilt Sensor 0.001° Resolution
Inclinometer
Product Description:
ACA616T/ACA626T-CAN2.0A is a full-temperature compensated
high-precision single / dual-axis inclinometer developed by RION
Technology on the basis of high-precision inclination platform. Its
good temperature stability can be used in a wide temperature
environment of -40~85℃ In addition, the system has a built-in
high-precision 24it A/D converter, and through a 5-level conversion
algorithm, it can measure the tilt and pitch angle of the sensor
output relative to the horizontal plane. Output protocol CAN2.0A.
The characteristics of non-contact installation make this product
have good system integration. Just fix the sensor on the surface of
the measured object with a screwdriver, the attitude and
inclination of the object can be automatically calculated. It has
strong ability to withstand shock and vibration, and has a great
competitive advantage among domestic counterparts. It is
specifically aimed at the industrial fields that high-end users
require.
Features:
- Single / dual axis inclination measurement
- Water-proof air-plug
- Highly anti-vibration performance >2000g
- Size:L92×W48×H36mm
- Measuring Range :±1～±60° optional
- Wide voltage input: 9～36V
- Wide temperature working: -40～+85℃
Technical Parameters:
| ACA616T/626T-C2 | CONDITIONS | PARAMETERS | UNIT |
| Measure range | | ±10 | ±30 | ±60 | ° |
| Measure axis | | X/XY | X/XY | X/XY | AXIS |
| Resolution | | 0.001 | 0.001 | 0.001 | ° |
| Measure accuracy | @25℃ | 0.003 | 0.01 | 0.02 | °(RMS) |
| Long term stability | | 0.01 | 0.02 | 0.03 | ° |
| Zero Temp. coefficient | -40~+85℃ | ±0.0004 | ±0.0004 | ±0.0004 | °/℃ |
| Sensitivity temp-coeffi | -40~+85℃ | ≤100 | ≤100 | ≤100 | ppm/℃ |
| Power on time | | 0.5 | 0.5 | 0.5 | S |
| Response frequency | 20Hz |
| Output rate | 20Hz |
| Interface type | CAN 2.0A |
| EMC | According to EN61000 and GBT17626 |
| MTBF | ≥98000 hours/times |
| Insulation Resistance | ≥100MΩ |
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) |
| Anti-vibration | 10grms,10～1000Hz |
| Protection grade | IP67 |
| Cables | Standard configuration: 2m length, wear-resistant, wide
temperature, shielded cable 5P * 5.7mm aviation connector |
| Weight | 235g(without cable) |
Applications:
★ Bridge & dam detection
★ Engineering vehicles automatic leveling
★ Laser equipment position
★ Medical facilities angle control
★ Underground drill posture navigation
★ Railway gauging rule , gauge equipment leveling
▶ WORKING PRINCIPLE
Adopt imported core control unit and apply the principle of
capacitive micro-pendulum. Using the principle of earth's gravity,
when the tilting unit tilts, the earth's gravity will produce a
gravitational component on the corresponding pendulum, and the
corresponding electric capacity will change. By amplifying and
filtering the electric capacity, the inclination is obtained after
conversion.
